WLAN Reassociation Request frame
In WLAN network, reassociation request frame is used by mobile stations in the following scenarios:
• Moving from one basic service area to the other service area in the same
extended service area.
• leaving the wifi network coverage area and
comes back to the same area again
Re-association request frame will include address of the WLAN station's current AP. This information will help new AP to contact old AP and transfer all the association data information. This transfer will include frames buffered with the old AP.
WLAN Reassociation Response frame
Reassociation response fields are same as association response frame.
What is Difference between
FIR filter Vs. IIR filter
difference between FDM and OFDM
Difference between SC-FDMA and OFDM
Difference between SISO and MIMO
Difference between TDD and FDD
Difference between 802.11 standards viz.11-a,11-b,11-g and 11-n
OFDM vs OFDMA
CDMA vs GSM
Bluetooth vs zigbee
WLAN MAC frames Links
WLAN Association Request and response frame
WLAN authentication Request and deauthentication frame
WLAN beacon frame
WLAN passive vs active scanning frame
WLAN Probe Request and response frame
WLAN reassociation Request and response frame
WLAN RTS and CTS frame
Other Standard MAC layer protocol
WIMAX MAC PROTOCOL
WLAN MAC LAYER PROTOCOL PART1
WLAN MAC LAYER PROTOCOL PART2
ZIGBEE MAC LAYER FRAME
BLUETOOTH MAC LAYER
802.11AC MAC LAYER