MHL vs superMHL-Difference between MHL-1,MHL-2,MHL-3,superMHL
This page compares MHL-1 vs MHL-2 vs MHL-3 vs superMHL and mentions difference between MHL-1, MHL-2, MHL-3 and superMHL.
MHL stands for Mobile High Definition Link. This interface type is used to transport video and audio output from smartphone or mobile devide to the display devices. The display devices include HDTV, PC monitor, projectors, A/V receivers, Blu-Ray Disc™ Players etc.
Over MHL link, mobile or smartphone acts as source device and display acts as sink device. Moreover MHL provides power to the mobile device.
MHL is based on TMDS technology similar to HDMI and DVI interface types.
Due to similar features, MHL to HDMI conversion and HDMI to MHL conversion is easy.
There are adapters available to perform these conversions.
Refer HDMI basics for more information.

MHL-1
Following are the features of MHL-1:
• Supports Maximum Resolution of 1080p60 i.e. supports 1080 video at 60 frames per second.
• Supports upto 8 channel audio
• Supports MHL Control (RCP) single remote
• Supports power charging upto 2.5 Watt
• Supports content protection HDCP 1.4,
HDCP is used as encryption protocol.
MHL-2
Following are the features of MHL-2:
• Supports Maximum Resolution of 1080p60
• Supports upto 8 channel audio
• Supports MHL Control (RCP) single remote
• Supports power charging upto 7.5 Watt
• Supports content protection HDCP 1.4
MHL-3
Following are the features of MHL-3:
• Supports Maximum Resolution of 4k30
• Supports upto 8 channel audio
• Supports blu-ray audio of types Dolby TrueHD, DTS-HD
• Supports MHL Control (RCP) single remote
• Supports power charging upto 10 Watt
• Supports content protection HDCP 2.2
• Supports upto 4 multiple displays
SuperMHL
Following are the features of SuperMHL:
• Maximum Resolution: 8K120 i.e. supports 8K video at 120 frames per second.
• Supports high dynamic range, BT.2020, Deep color (10 bits, 12 bits, 16 bits)
• Supports upto 8 channel audio
• Supports blu-ray audio of types Dolby TrueHD, DTS-HD
• Supports Dolby Atmos, DTS:X types
• Supports MHL Control (RCP) single remote
• Supports power charging upto 40 Watt
• Supports content protection HDCP 2.2
• Supports upto 8 multiple displays
• SuperMHL is backward compatible with previous MHL-1, MHL-2 and MHL-3 link types
• Various adapters are available for different connectors viz. USB Type-C,
Micro-USB, HDMI Type-A and other proprietary connectors.
What is Difference between
Difference between 100Base-T1 and 1000Base-T1
CAN vs TTCAN
CAN vs TTP
RS232 vs RS422 vs RS485 interface
LIN vs CAN vs FlexRay vs MOST
Difference between MOST25,MOST50,MOST150
Useful interface types
RS232 interface RS485 interface RS422 interface SPI interface CAN interface interface types and converters DigRF interface what is microcontroller microcontroller vs microprocessor microcontroller programming