LTE bandwidth vs sampling frequency vs resource block
• LTE System Features
• LTE Terminology
• What is LTE?
• LTE UE categories
• LTE Frequency Bands
• LTE frame structure
• LTE Physical layer
• LTE protocol stack
• LTE Logical,Transport,Physical channels
• LTE throughput
• Voice over LTE
• Carrier Aggregation in LTE
• LTE Advanced
• LTE vs LTE Advanced
• LTE-3GG-document-references
This page on LTE bandwidth vs sampling frequency vs resource block covers relation between LTE bandwidth,sampling frequency and resource block. Please check table below for values. For example 512 point FFT case,bandwidth is 5MHz, sampling frequency is 7.68MHz and number of resource blocks are 25. Please check our page on LTE Terminology for description of these terms.
Channel Bandwidth(MHz) | 1.4 | 3 | 5 | 10 | 15 | 20 |
---|---|---|---|---|---|---|
No. of Resource Block(NRB) | 6 | 15 | 25 | 50 | 75 | 100 |
No. of occupied subcarriers | 72 | 180 | 300 | 600 | 900 | 1200 |
IFFT(Tx) /FFT size(Rx) | 128 | 256 | 512 | 1024 | 1536 | 2048 |
No. of sampling frequency (sampling rate) |
1.92 | 3.84 | 7.68 | 15.36 | 23.04 | 30.72 |
samples per slot | 960 | 1920 | 3840 | 7680 | 11520 | 15360 |
What is Difference between
difference between FDM and OFDM
Difference between SC-FDMA and OFDM
Difference between SISO and MIMO
Difference between TDD and FDD
Difference between 802.11 standards viz.11-a,11-b,11-g and 11-n
OFDM vs OFDMA
CDMA vs GSM
Bluetooth vs zigbee
Fixed wimax vs mobile