LoRaWAN Frequency bands, data rate, EIRP KOREA (KR region)
This page describes LoRaWAN Frequency bands and channels used in KOREA (KR region).It also mentions data rate and Tx power (i.e. EIRP).
LoRaWAN frequency bands, channels, EIRP and data rate requirements are specific to different parts of the world. Let us check the same for Korea.
What is LoRaWAN frequency bands used in KOREA ?
Band KR920-923 ISM Band is used in KOREA for LoRaWAN system. The first three Channel frequencies used are 922.1 MHz, 922.3 MHz and 922.5 MHz.
The table also mentions modulation, BW (125 KHz), channels, bit rate and duty cycle.
LoRaWAN data rates in Korea
Following table mentions bit rate or data rate for Korea LoRaWAN end device.
LoRaWAN Transmit (Tx Power) and EIRP in Korea
The table below mentions Tx Power and EIRP for LoRaWAN Korea region.
Max EIRP is considered to be +14dBm.
LoRaWAN frequency Bands in other regions of the world
• 902 to 928MHz RF Band is used in US.
• 433 to 434 MHz RF band is used in EU region.
• 920.5 to 924.5 MHz, 779 to 787 MHz, 470 to 510 MHz, 433.05 to 434.79 MHz, 314 to 316 MHz, 430 to 432 MHz and 840 to 845 MHz LoRaWAN bands are used in CHINA.
Reference: RP002-1.0.0 LoRaWAN Regional Parameters, www.lora-alliance.org.
LoRaWAN related links
Difference between Lora, INSTEON, Z-wave, Zigbee, X10, HomePlug and other M2M IoT wireless technologies
One can easily derive difference between Lora and other wireless IoT technologies such as zigbee, z-wave, insteon, X10, Homeplug, EnOcean,
Bluetooth etc. Refer above table and IoT wireless technologies which mentions
tabular comparison between these wireless technologies with respect to coverage range, frequency of operation, data rate, security, applications etc. Also refer following difference between
LoRa vs NB IoT vs SigFox INSTEON vs Zigbee INSTEON vs X10 INSTEON vs HomePlug INSTEON vs Z-wave